Woodland Scenics Mod-U-Rail - Build the layout of your dreams!

HO Scale

These HO scale track plans have been created for your conveinence in building your dream layout using the Mod-U-Rail System. Click here for a printable copy of the track plans below, (must have Acrobat Reader installed). Track plans shown with additional items listed on printable copy.

6 x 4 1/2-foot layout
1/2-inch = 1-foot

9 x 9-foot layout
1/2-inch = 1-foot

Design Your Layout

Now design your layout with the module patterns, moving them around to give you the best layout possible for your room. You can refer to books and magazines for ideas. Allow for mountainous areas, bridges, waterways, buildings and turnouts. Once you have planned your layout, glue or trace the module patterns onto the Grid. Remember, modules can be customized to perfectly fit your room.
Next step is how to use the Templates and Track Plan.

Mod-U-Rail Stands

These easy-to-build stands are perfect for your Mod-U-Rail Layout. There are three different wooden stands: one for the Straight and two for the Corner Module Kit. The stands are ready to assemble with instructions and all the necessary hardware. We even pre-drilled the holes. Each stand is 35 1/2 " tall. The adjustable feet allow you to level the stand. It also includes bolts to join the stands together side-to-side or end-to-end. When finished prime and paint!

Straight Module Stand (ST4790)
18"x36"x35 1/2"

Corner Module Stand (ST4791)
36"x36"x35 1/2"

Square Module Stand (ST4792)
36"x36"x35 1/2"

Click HERE to order.

Order Corner Module Kit here!

Corner Module Kit built with kit contents.

•	36" x 36" module
•	Corner module can also be built as a square
•	Great for N or HO, adapts to S, Z and O scales
•	All materials included Click here for a list of contents (must have Acrobat Reader installed)
•	Easy to build (no complicated calculations, power tools, or dusty mess)
•	Works with all track brands
•	Easy bolt-together system (includes two Connector Plates and hardware)
•	Save over 30% on items purchased separately

Corner Module Kit (ST4802)

Corner Module Kit built built as a square.

The Woodland Scenics Mod-U-Rail System gives you the freedom and convenience to build the layout of your dreams: one module at a time! The system consists of two module kits, straight and corner, which when assembled, can be bolted together to create a layout of any size, in most any scale. These kits have all the basics, including landscaping, for building a module, but you are not limited to using just the materials in the kits. Woodland Scenics has a variety of SubTerrain, Terrain and Landscaping products for your layout. You can add details at any time to express your individuality. The kit goes together quickly and easily with expert results. You won't believe the possibilities! Get started now!

Track, train, buildings and vehicles sold separately.

• Back to Woodland Scenics Home page.

Introduction

Click here to view our
NEW 8 Minute Introduction
to Mod-U-Rail video.

(Windows Media Player 9 or 10 required. Get it here...)

Straight Module Kit (ST4801)

Order Straight Module Kit here!

Straight Module Kit built with kit contents.

•	18" x 36" module
•	Great for N or HO, adapts to S, Z and O scales
•	All materials included Click here for a list of contents (must have Acrobat Reader installed)
•	Easy to build (no complicated calculations, power tools, or dusty mess)
•	Works with all track brands
•	Easy bolt-together system (includes two Connector Plates and hardware)
•	Save over 30% on items purchased separately

Connector Plate Set (ST4780)

Order Connector Plate Set here!
	Each kit includes two Connector plates for bolting end-to-end.
	The Connector Plate Set gives you additional connectors for unlimited possibilities in your layout design.

Connector Plates are anchors for bolting Mod-U-Rail System Modules together. They add tremendous versatility to the Mod-U-Rail System.
The Connector Plate Set is used to connect the Mod-U-Rail System in different configurations. With this product, you are not limited to bolting the modules end-to-end. Now you can bolt them together side-to-side as well. The Connector Plate Set (ST4780) includes four Connector Plates and hardware for bolting.

Room Layout and Design

You can design your layout to perfectly fit any room.
• Begin by drawing your room size on the Grid located in your instruction booklet (or click here to open a printable copy - must have Acrobat Reader installed). You may want to make copies and tape the copies together if your room size is larger. Be sure to consider your electrical outlets. Mark the doors (and the door sweep areas), windows, vents, closets, bathrooms, posts, etc. so that your Grid is an exact replica of your room.
• Cut out the patterns, ruler and templates from the Layout Design Sheet located in your instruction booklet (or click here to open a printable copy - must have Acrobat Reader installed). You may want to make several copies of this sheet depending on the number of modules you will need to make your layout.
• Now design your layout with the module patterns, moving them around to give you the best layout possible for your room. You can refer to books and magazines for ideas. Allow for mountainous areas, bridges, waterways, buildings and turnouts. Once you have planned your layout, glue or trace the module patterns onto the Grid. Remember, modules can be customized to perfectly fit your room.

Templates and Track Plan

Radius Templates are used to make curves, depending on scale and railcars you are using. There are other track radii available. We recommend that you do not make tighter curves than those on the template.
Turnouts are special pieces of track that you can purchase at your local hobby shop. Turnouts are places on your track where you want your train to deviate from the main line: such as railyards, depots, loading docks, etc. The turnout templates (#4, #6 and #8) are three options available to you.
When laying out an S curve you must place a straight section of track in between the two curves. This is necessary so your train will not derail. It should be at least the length of your longest railcar. Click here to open a printable copy of this template (must have Acrobat Reader installed) .
Once your plan is completed, use colored pencils to create your layout so you can distinguish your tunnels, water, bridges and other features. Now take your layout to your local hobby shop and they will help you select the right track. Purchase the kits you will need to begin building your dream layout...one module at a time.

Layout Design Sheet

Cut out the patterns, ruler and templates from the Layout Design Sheet. Click here to open a printable copy - must have Acrobat Reader installed. You may want to make several copies of this sheet depending on the number of modules you will need to make your layout. Next Step is Design Your Layout.

Grid and Room Design

Click here to open a printable copy (must have Acrobat Reader installed), of the grid to create your dream layout. First you will draw your room size on the grid (1/2-inch = 1-foot). You may want to make copies and tape the copies together if your room size is larger. Be sure to consider your electrical outlets. Mark the doors (and the door sweep areas), windows, vents, closets, bathrooms, posts, etc. so that your Grid is an exact replica of your room. Next Step is how to use the Layout Design Sheet.

N Scale

These N scale track plans have been created for your conveinence in building your dream layout using the Mod-U-Rail System. Click here for a printable copy of the track plans below, (must have Acrobat Reader installed). Track plans shown with additional items listed on printable copy.

6 x 3-foot layout
1/2-inch = 1-foot

9 x 6-foot layout
1/2-inch = 1-foot

Get a FREE Straight Module Kit!

• Purchase 5 modules,
receive 1 FREE Straight Module Kit.

• To receive a FREE kit: mail all your sales
receipts, five proof-of-purchase barcodes
(from kit box), plus shipping and handling
fees* to:
Woodland Scenics
Attn: Mod-U-Rail Promo
P.O. Box 98
Linn Creek, MO 65052

*Continential USA-$20.00; Hawaii and
Alaska-$30.00. For all other countries, go to:
www.woodlandscenics.com/fms.cfm

Get Started

Now that you understand the Mod-U-Rail System, you will want to design your dream layout. It is very easy and fun to do.
First you will print the grid and design your room. Next, print and cut out patterns, ruler and templates. Finally create your layout and track plan. Start with Grid and Room Design.

Design Your Own Layout Here!

Click the module of your choice and drag it to the grid to create the layout of your dreams! There are four Straight Module options provided and five Corner Module options. Arrange them any way you please. Just click Refresh to start over. When your finished, print them out to help you plan your layout. Samples are provided below. Begin!